Solvent based paint. Provides an alternative to tiling in bathrooms, showers, kitchens, toilets and low cost housing. Good resistance to a wide range of chemicals and most solvents.
White
DULUX TRADE HI-CHEM EPOXY ENAMEL
Good resistance to a wide range of chemicals and most solvents.
DULUX TRADE HI-CHEM EPOXY ENAMEL
₦13,650.00
Good resistance to a wide range of chemicals and most solvents.
Key Information
-
Finish Gloss
-
Coverage Up to 9m2 per Litre on sealed surfaces
-
Drying Time 6 hours
-
Coats 2
Product Description
Solvent based paint. Provides an alternative to tiling in bathrooms, showers, kitchens, toilets and low cost housing. Good resistance to a wide range of chemicals and most solvents.Application Description
Precautions
Do not apply directly to bare metal surfaces.
Recommended for interior surfaces only.
Cure is slow at low temperatures; below 15°C it takes some days to reach handling and recoating hardness.
The pot life is short above 35°C; shield pressure pots and fluid lines from direct sun.
Equipment and brushes must be cleaned immediately.
Heat resistant to ± 120°C (continuous) although some yellowing occurs above 100°C.
The film will chalk on exterior exposure.
Not suitable for direct application to powdery or friable surfaces whether previously painted or not.
Application
Airless Spray: Ready for use after induction period of 30 minutes.
Air Spray: After mixing, thin 10% by volume and allow 30 minutes induction.
Brush: Can be used on small areas where joining is not a problem e.g. signs, pipes, colour bands, etc.
Roller: Short nap roller may be used on tanks and silos taking precautions to pick up the wet edge to
avoid “window-paning’.
Undercoat: The product can only be over coated with itself. If an undercoat is required, Dulux Trade
Hichem Enamel thinned 10% by volume can be utilised. N.B. Mix the paint first, then stir in the thinners.
Coats Required
Apply two to three finishing coats to new surfaces to achieve a closed film and solid colour.
Health & safety
For detailed safety information refer to Material Safety Data Sheet.
Keep out of reach of children.
Store away from direct sun, heat and severe cold, and avoid naked flames or sparks.
Ensure good ventilation during application and drying.
Flash Point 37oC.




Health and safety
For detailed safety information refer to Material Safety Data Sheet.
Keep out of reach of children.
Store away from direct sun, heat and severe cold, and avoid naked flames or sparks.
Ensure good ventilation during application and drying.
Flash Point 37oC.
Tips & Advice
PRECAUTIONS:
Do not apply directly to bare metal surfaces. Recommended for interior surfaces only. Equipment and brushes must be cleaned immediately. Not suitable for direct application to powdery or friable surfaces whether previously painted or not.
STORAGE:
Store in a cool, dry, well ventilated place protected from moisture, away from sources of heat, ignition and direct sunlight. Containers which are opened should be properly resealed and kept upright to prevent leakage.
For more details refer to the technical data sheet.
Reviews
There are no reviews yet.